User Manual

7.8. The ADSR section
7.8.1. Trig
Normally a gate signal from the MiniBrute 2S pads is required to trigger the ADSR Envelope.
But you can use a different source instead, such as a trigger signal from a modular
synthesizer. To make that happen, plug the new source into the ADSR Trig input jack.
7.8.2. ADSR Out jack
The ADSR Envelope is a flexible modulator. If you want to use its stages to control an internal
parameter (e.g., VCO 1 FM), connect a cable from the Out jack to the input connector of that
pararameter.
You can also send that signal to an external device, such as the filter of another modular
synthesizer.
The ADSR section
72 Arturia - User Manual MiniBrute 2S - The Patch bay