User Manual

• Fully analog signal path

• 2 multi-waveform voltage-controlled oscillators (VCOs)

• Sawtooth, square, and triangle waveforms (VCO 1)

• Ultrasaw, Metalizer, and pulse width modulation (PWM)

• Sawtooth, square, and sine waveforms (VCO 2)

• VCO 2 can be used as an additional LFO

• FM modulation between oscillators

• Random noise generator

• Steiner-Parker multimode filter with FM and RM (Resonance Modulation)

• 48-point patchbay

• Hard sync input for VCO1

• Separate VCA for modulation routings

• Two envelopes: ADSR (filter) and AD (amplitude)

• Loopable AD envelope

• Two multi-waveform LFOs with free-run or sync modes

• Brute Factor: overdrive the filter input with the audio output

• External audio can be routed through the Oscillator mixer or directly to the output

• Sequencer and arpeggiator, syncable to external clock: MIDI, USB, or CLK (1 step,

1 pulse, 24/48 ppq)

• MIDI input and output connectors

• USB port for use with a DAW

• Audio and headphone outputs

• Use with Arturia's MIDI Control Center for device configuration and sequence

archival

But that’s enough talk — plug in your new analog friend, and start shaking the walls!

Arturia - User Manual MiniBrute 2S - Introduction 5