User Manual

4. REAR PANEL FEATURES
The rear panel of the MiniFuse 2 provides access to audio and MIDI connections.
1. Outputs - these 1/4” balanced stereo outputs can be connected directly to active
studio speakers or other devices such as amplifiers and mixers.
2. MIDI In - connect MIDI devices to this jack using a standard 5-pin MIDI cable.
Devices connected to this input can be used to trigger and control software
instruments and effects.
3. MIDI Out - this output allows you to output MIDI data from your computer to
control other MIDI-compatible hardware devices.
4. Hub - this convenient USB port allows you to plug in other USB devices, like
thumb drives or MIDI controllers.

While the Hub port is sufficient for powering most controllers and portable drives
up to 250mA, it may not provide enough power for some devices that require higher
power draw. In these situations, we recommend plugging these devices directly into your
computer, or into a separate powered USB hub.
5. USB - connect the interface to your computer by plugging the supplied USB cable
into this port and your computer. This connection provides power to the interface
and enables communication between the interface and your computer.
6. Kensington lock - this optional security slot can be used for securing the interface
using a Kensington lock cable.
6 Arturia - User Manual MiniFuse 2 - REAR PANEL FEATURES