User Manual

8.8. Customize the Faders
There are 3 separate banks of faders, which are selected using the Bank tabs:
The Mode menu lets you choose between the 3 modes available for each fader. Each mode
contains a unique set of parameters:
8.8.1. Fader Off
Disables the fader. This can be used to prevent accidentally moving the fader when it is not
needed in the User preset.
8.8.2. Fader Control
This is the default mode for the fader, and it lets you customize how each fader responds
when used.
• Name: Lets you enter a custom name for the fader, which will be shown on the
display when the fader is used. The name can be a maximum of 12 characters
long.
• Option: This lets you set the fader’s function between a traditional Fader, and a
Drawbar for use with virtual organ instruments.
• Channel: Select the MIDI channel output for the selected fader, between 1 to 16.
This can also be set to “User”, which will make the fader output to the MIDI
channel selected for the MIDI Ch button [p.63].
• CC Number: The selected fader can be set to transmit any MIDI CC# between
0-127. Many MIDI CC numbers are named within the drop-down menu to identify
standard uses.
• Min Value & Max Value: These parameters let you set the minimum and
maximum range of the selected fader. Click and drag the knobs or enter a value
in the fields below them to set the range.
Fader Bank 2 selected
Arturia - User Manual KeyLab MkII - MIDI Control Center 70