User Manual

ARTURIA – ANALOG FACTORY 2.0 / EXPERIENCE. - MANUAL
34
4.2.2.1 Connection to a MIDI track
So that Analog Factory 2.0 can play information coming from a MIDI track, you have to
choose a MIDI track and select ANALOG FACTORY as MIDI <<output>> of this track. See
the picture below for more detail on how this is accomplished.
Connection of a MIDI track to ANALOG FACTORY
The events played on a MIDI keyboard are recorded by your host sequencer, and now you
can use the MIDI editing possibilities of the sequencer to control any parameter with Analog
Factory 2.0.
4.2.2.2 Saving of presets
When the session/project is saved, ANALOG FACTORY is saved in its last mode of operation,
with all modifications intact. For instance, if you were working on a “P1” preset in which
you have modified parameters (without saving them as a separate voice in the plug-in
itself), at the next opening of the piece, ANALOG FACTORY will load the “P1” preset and the
modifications.
The drop-down menu with the VST sequencer allowing you to save a new voice is of course
usable with Analog Factory 2.0. However, it is highly advised to use the ANALOG FACTORY
internal menu: the presets saved in this way are usable in any other mode (standalone or
other sequencer), they can be exported and exchanged more easily, and they will remain
compatible with the future Analog Factory versions.
4.2.2.3 Automation
The automation works the same with Analog Factory as with any VST plug-in (for more
detail about automation, refer to the VST sequencer documentation).
4.3 Audio Unit (Max OSX only)
4.3.1 Installation
The Audio Unit plug-in is automatically installed in the folder reserved for this purpose, in
/Library/Audio/Plug-Ins/Components/