Instructions / Assembly

ITEM NO.: LED998168HB
68W LED PENDANT LAMP
Installation Steps:
3. Secure the ceiling lamp box on and screw
1. The lamp can only be used indoors and dry evironment.
WARNING
2. Please cut off power before install the lamp.
3. Please install by professinal electrician only.
Pendant lamp
1 pcs
Ceiling bracket
1 pcs
Rubber plug
Screws
Screws
Wire nut
Nut
2 pcs
2 pcs
2 pcs
2 pcs
3 pcs
Allen key
1 pcs
Feature: Compatible to wall dimmer switch
1. Screw the ceiling bracket into the ceiling
with
Screws(C).
**For Cement Ceiling or considering the
bearing capacity, drill
two holes to fix the
hole position, put Rubber Plug(B) into the
holes and screw it with Screws(D).
2. Connect the corresponding wires.
Twist and fold the live wire (Black) from the
ceiling and pendant, twist and fold the neutral
wire (White) from the ceiling and pendant, twist
and fold the earth wire ( ellow and Green) from
the ceiling and pendant.
Secure the connected wires by Wire Nut (E)
Live wire(Black)
Neutral wire(White)
Earth wire(Yellow and Green)
Y
H
Screws
2 pcs
H
G
H
.
with Nuts (F).
**Adjust Height: Loosen and tighten Screws (H) to
adjust to the desired height by Allen Key (G)