Instructions / Assembly

1.Remove all parts from the carton A&B and

place them on a protected surface or carpet.

Assembly Instructions

ITEM NO: LBL4567

3.Attach the back to the seat and arm as

shown, make sure that all the male and

female brackets align firmly as shown. (Two

person needed here.)

4.Align each hole of the screw, then insert in each butterfly

screw and put on each flat washer, tighten them firmly by

Butterfly Nuts as shown. Attach the plastic leg to the middle

bottom of the seat as shown. Attach the 4 Wood legs to the

bottom of each arm as shown.

2.Hang the left side facing seat over the left side facing arm as shown, make sure the male and female brackets

align firmly as shown. Same as the right side facing seat and the right side facing seat arm. (Two person needed

here.)

The “A” box contains the following parts :

1 Seat

3 Seat Cushions

3 Back Cushions

The “B” box contains the following parts :

1 Back

2 Arms

4 Wood Legs

1 Plastic Leg

5 Butterfly Screws

5 Flat washers

5 Butterfly Nuts

SPARE

1 Butterfly Screw

1 Flat washer

1 Butterfly Nut

PAGE 1
Assembly Instructions ITEM NO: LBL4567 1.Remove all parts from the carton A&B and place them on a protected surface or carpet. The “A” box contains the following parts : 1 Seat 3 Seat Cushions 3 Back Cushions The “B” box contains the following parts : 1 Back 5 Butterfly Screws 2 Arms 4 Wood Legs 5 Flat washers 5 Butterfly Nuts 1 Flat washer 1 Butterfly Nut 1 Plastic Leg SPARE 1 Butterfly Screw 2.
PAGE 2
5.Attach each seat cushion to the seat, make sure they are settled by correct direction. Attach each back cushion to the back, make sure they are settled by correct direction( Left, Middle, Right).