User Manual

Table Of Contents

The suggested control throw setting for the Twin 64mm F-15 Special Edition are as follows (dual

rate setting):

Tips: The maiden flight should always be flown

using low rates, fly the aircraft until you are famil-

iar with its characteristics prior to trying high

rates. Make sure the aircraft is flying at a decent

altitude and speed prior to using high rates, as

the aircraft will be sensitive to control inputs with

the larger control surface movements.

16mm up / down

Elevator

Aileron

Rudder

12mm up / down

14mm left / right

16mm up / down

18mm left / right

Preflight check

Control horn and servo arm settings

transmitter and model setup

Control throws

After assembly and prior to your first flight, make sure all control surfaces respond

correctly to your transmitter by referring to the diagram below.

More control throw

Less control throw

Horns

Arms

ElevatorRudderAilerons

1. The table shows the factory settings for the

control horns and servo arms. Fly the aircraft at the

factory settings before making changes.

2. After flying, you may choose to adjust the linkage

positions for the desired control response.