User Manual

The suggested control throw setting for the P-47 are as follows (dual rate setting):

Tip: The maiden flight should always be

flown using low rates, fly the aircraft until you

are familiar with its characteristics prior to

trying high rates. Make sure the aircraft is

flying at a decent altitude and speed prior to

using high rates, as the aircraft will be sensi-

tive to control inputs with the larger control

surface movements.

14mm up / downElevator

Aileron

Rudder

10mm up / down

12mm left / right

14mm up / down

16mm left / right

Preflight check

Clevis installation

transmitter and model setup

Control throws

1.Pull the tube from the clevis to the linkage.

2.Carefully spread the clevis, then insert the

clevis pin into the desired hole in the control

horn.

3.Move the tube to hold the clevis on the

control horn.

After assembly and prior to your first flight, make sure all control surfaces respond correctly to your transmitter by referring

to the diagram below.