Replacement Part List

Attach Floor Frame Assembly

PL07

6 Do not fasten decking material at this time!

NOTE: FLOOR FRAME MUST BE LEVEL AND

SQUARE BEFORE PROCEEDING!

If you are using decking material, complete the floor

frame assembly for the storage building as shown in

the assembly instructions found in building carton.

Position floor frame assembly on base kit, equal

distance on the sides, front and rear. Disregard

statement in building instructions and anchor front

and rear floor frames at dimension shown to side

channels and side floor frames to cross channels

using bolts and nuts.

If you are using the base kit as a finished form to pour

concrete, see next page. Pour concrete first, then

attach the floor frame assembly using concrete an-

chor bolts, available at your local building supply

store.

RAMP MUST BE FASTENED TO FRONT FLOOR FRAMES

SO THAT HOLES AT 5/16" 0,8 CM ARE TOWARD THE

FRONT TO LINE UP WITH HOLES IN BASE KIT CHANNELS

AT 2" 5,1 CM DIM.

Model ES109

USE SLOT

2" 5,1 cm

2" 5, 1 cm

8x8 or 10x8 or 10x9

5/16"

0,8 cm

SIDES & REAR

2" 5,1 cm

NOTE: PICK UP COMPLETED KIT TO ATTACH

NUTS TO BOLTS AT THESE TWO LOCATIONS.

* If there are no anchor holes in floor frames, or they do not line up:

Assemble the base kit to match the floor frames, and drill 1/4" (6 mm)

dia. holes at the cross members for attachment with bolts and nuts

provided.