Installation Guide

23
(QTY: 4+)
You will need for this page:
Step 7: Wall Angles
Starting at the front and rear of the building, attach
Side Wall Angles to the front and rear wall of the
building with Large Screws as shown.
1
23H
(QTY: 4+)
Side Angle
4+
10625
2
Next, insert Large Screws where the Wall Angles meet
the Trusses. Where the Wall Angles overlap, align the
holes as shown to the left and insert two Small Bolts and
Nuts to secure. All Side Wall Angles overlap by 8 1/4” (21,0 cm).
(QTY: 4)
LS
LS
LS
SB
SB
8 1/4”
21,0 cm
Overlap Length
All angles overlap by 8 1/4”
(21,0 cm)
10625
10625
LS SB LS
10625
LS
10625
10’x10’ (3,0 m x 3,1 m)
building shown.
Continue until Side Wall
Angles are installed along
both sides of the building.