ARROW HOW TO: Simple Chair Upholstery GETTING STARTED Love the chair but hate the outdated and torn fabric? Here’s an inexpensive way to update and personalize an old chair. We chose the Arrow T50X staple gun for this project. One of the many versatile Arrow staple guns, this durable and powerful tool is ideal for chair upholstery.
WHAT YOU NEED Tools / Supplies: • • • • • • • Arrow T50X Staple Gun Arrow T50 504 ¼” Staples Arrow SL24D Staple Puller Screwdriver Scissors Batting Fabric of your choice
STEP 1 Remove the seat from the chair frame by unscrewing the screws on the underside. Be sure to indicate the orientation of the seat prior to removing it from the chair frame. The existing screw holes will be used when reattaching the seat at the end – the holes will need to line up. STEP 2 Using the Arrow SL24D staple remover, remove the staples that hold the old fabric in place. Then remove the old fabric from the seat.
STEP 3 Evaluate the padding material to determine if it needs to be replaced. There may be batting, foam or wood. In this case, we are replacing the batting and reusing the foam. STEP 4 Position the seat, backside facing you, on the fabric of your choice. Make sure the seat is in the desired position to maximize the pattern on the fabric. Allow 4” to 6” of extra fabric on all sides of the seat, depending on the thickness of the padding, you may need more.
STEP 5 Using the Arrow T50X Staple Gun, begin stapling first the batting, then the fabric to the seat, starting in the center of one of the sides. Continue to rotate the seat, stapling as you go. It’s a good idea to check occasionally while stapling to make sure the pattern is lined up and looking good. Like every upholstery project, work to keep the fabric tight without overstretching it. Keep the screw holes clear.
STEP 6 Once the fabric is completely stapled, trim any excess fabric that could result in bulky corners and make sure the screw holes are clear. STEP 7 Place the newly upholstered seat on the chair frame. Be sure to line-up those screw holes for easy attachment.
BEFORE AFTER We’d love to see how your DIY Chair Upholstery project turned out! Share your results with us on Facebook, Instagram or Twitter by tagging #MadeWithArrow.