Full Product Manual

Chapter 6: Operating Your SBX-AC1200P as a Router

STANDARD PN 365-095-28246 x.1 SURFboard SBX-AC1200P Network Extender User Guide

To Set Up a Custom Filter

1. At the top of the screen, click the drop-down box and select Block Custom.

2. Enter a name to identify this user profile in the Description field.

3. Enter the 12-digit (hexadecimal) MAC address of the device for which you are creating

Parental Controls in the MAC Address field.

4. Enter the web address of the Internet site that you want to block in the URL field.

5. Enter the Start Port number and the End Port number, and select the Protocol that you

want to use.

6. Select the days of the week that you want to block access.

7. Select the time range that you want to block access.

8. In the Enabled field, select On or Off to enable or disable this Parental Control restriction.

9. Click Apply.

Set Up Port Triggers

You can use Port Triggers to configure dynamic triggers to specific devices on the LAN. This

allows special applications that require specific port numbers with bi-directional traffic to