Instructions / Assembly

Helpers needed to assemble: 2
Estimate time frame to assemble: 20 minutes
#
Picture Description
Quantity
1
2
3
4
5
A
B
C
D
E
Seat
Leg
Footrest
Swivel Plate
Bolts(M6x25)
Bolts(M6x20)
Bolts(M6x16)
Washer
Allen Key
1
4
1
1
1
4+1EXT
10+1EXT
2+1EXT
4
2
* Step 5: Flip the barstool over upright as seen. Insert 4pcs Plugs (E) in the leg as shown.
Adjust the foot nails if legs are uneven.
* Step 6: Test the barstool is firmly on the ground and the seat does not wiggle.
* Step 7: Sit and enjoy your new barstool.
* Keep the Allen Key and Tighten all screws each 3 months for safety concern!
Plate
G 1
Plug
3
A
A
A
A
2
80%
5
B
80%
B
4
100%
B
C
D
1
E
E
E
E
* Step 1: Loosely tighten the 4pcs Leg (2) to the Footrest (3) with Bolts (A M6x25) .
* Step 2: Use 4pcs bolt (B M6x20) to tighten the Plate (5) to Leg (2) with
Allen Key.
* Step 3: Turn the barstool legs over and use 4pcs bolt (B M6x20) to tighten the
Swivel Plate (4) with Allen Key. Make sure the plate aligns with the bolt holes on
barstool legs base. Then make sure all bolts are fully tightened on previous steps.
* Step 4: Once the swivel is secure, we will add the seat under the barstool to
connect the seat to the legs. Place 2pcs Washers (D) in the front of the seat.
Use 2pcs bolts (B M6x20) and 2pcs bolt (C M6x16) to tighten the swivel plate and
seat. Make sure the plate aligns with the washers and bolt holes on the seat.
Product Assembly Instructions
Item#: Diana Swivel Chair