User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- Use the Arlo app
- Insert the battery
- Check the LED
- Find a good location for your camera
- Wall-mount your camera with the magnetic mount
- Install an optional outdoor mount (sold separately)
- Install an XL rechargeable battery and housing (sold separately)
- Install a Total Security Mount (sold separately)
- Check your camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera
- HEVC 2K playback-supported devices
- 3. WiFi Setup and Connections
- WiFi connection options for your camera
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your camera’s WiFi connection to a SmartHub or base station
- Move your camera’s WiFi connection to a direct router connection
- 4. Use your Pro 4 Spotlight Camera
- Turn the camera spotlight on and off manually
- Foresight
- Record clips from live video
- Take a snapshot from live video
- CVR with an optional Arlo SmartHub or base station
- Customize your camera feed image
- Motion detection activity zones
- 2-Way Audio
- Turn the camera siren on and off manually
- View recordings and snapshots
- Download recordings
- 5. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Use a rule to activate the the camera’s siren
- Add a rule with an optional base station siren trigger
- Manage alerts
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your camera
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Video Settings
- Change the audio settings
- Adjust the flicker setting
- Restart the camera from the Arlo app
- View device information
- Remove a device from your account
- 7. SmartHub or Base Station USB Storage
- 8. SmartHub SD Card Storage
- 9. Arlo Connect
- 10. Arlo Rechargeable Battery
- 11. Troubleshooting
8
2. Get Started
Use the Arlo app
The free Arlo app helps you complete setup and guides you through the
installation process.
1. Open the Arlo app and connect to your WiFi network.
If you don’t have the app, you can download it and create your Arlo
account.
Once you set up your Arlo account, you can access it from the Arlo
app on a smartphone or tablet, or from a computer using a web browser. If you’re using a
computer, enter https://my.arlo.com/#/login in the address bar of the browser.
2. Open the Arlo app and connect to your WiFi network. Then select Add New Device and
add your camera.
Insert the battery
The Pro 4 Spotlight Camera consists of two parts. The camera part is where you insert the
battery. The housing protects the camera.
Note: The battery comes partially charged. We recommend that you fully charge the battery
before using your camera. See Charge your camera battery on page 75.
To insert the battery:
1. Align the battery and insert it into the battery
compartment.
The battery only inserts one way.
The LED on the camera blinks blue.
2. Insert the camera into the camera housing by
pushing down on both the le and right sides of
the camera until it clicks into place.