Operation Manual

To prevent any leakage, have a technician to control the hoses every
two years. If the machine is placed at cold ambient temperatures,
the water remining inside the pump and hoses should be removed
from the filters. Also to prevent freezing, empty the water intake
hoses by disconnecting from taps.
Hoses
Water intake filter
Drum
14
Do not leave any metal objects (pins, needles, etc.) inside the drum.
These objects may cause rust on the drum surface. Do not clean
the drum with scratching elements.
At the end of the water intake connection module and water inlet
hose-tap side, there exists filters. These filters prevent any dirt and
objects passing into the machine. It is advisable that these filters
should be cleaned every 30-40 washes. To clean the filter, first turn
the tap off. Then, disconnect the hose and clean the filter with a
thin brush. If the filter is very dirty, you may clean it by pulling out
with pliers. To clean the filter at the tap side of the hose, pull it out
by hand and clean the filter under the tap water.