Instructions / Assembly

2
Trigger
Safety Lock
1
D
9
7
2
1
4
3
5
8
6
10
Pump
High Pressure Hose
Pump
Hose
Reset
Package content:
1. Pressure Water Unit
2. Manual
3. Adjustable Spray Nozzle
4. Turbo Nozzle Lance
5. Gun
6. Detergent Tank
7. Nozzle Cleaning Tool
8. High Pressure Hose
9. Garden Hose Fitting
10. Accessories Holder
Gun Safety Button (D)
1 2
3
2. Insert lance adapter into the
gun push and turn clockwise to
positive stop as shown.
4
5
4. Attach the high
pressure hose onto the
pump water outlet by
turning clockwise and
hand tightening.
6
5. a) Attach swivel adapter to
pump water inlet, if not already
attached. Notice the swivel
adapter is marked with the words
pump and hose. Make sure to
connect pump side of the adapter
to the pump water inlet to prevent
damage to the threads.
b) Attach garden hose to swivel
adapter side marked hose.
6. Activate the lock by
holding the gun and push
the lock from left to right.
Squeeze trigger to make
sure the trigger does not
move. The saftey trigger
lock should be locked at
all times when pressure
washer is not in use.
7. a) Plug the power cord
into a grounded 120V outlet
and press the reset button as
shown.
b) THIS MUST BE DONE
EACH TIME THE UNIT IS
PLUGGED IN AN OUTLET.
Assembly And OperAtiOns sheet
Assembly
OperAtiOns
Ar112
3. Press release button on
bottom of gun toward back of
the gun, then insert high pressure
hose.
7

Summary of content (2 pages)