Installation Guide

Compatibility

Inlet Threading

Outlet Threading

Connection Type

Material

Specification

Warranty

SKU

All Aquor hydrants and

outlets except the Ground

Hydrant

1/2” NPT (f)

Unique to Aquor hydrants

and outlets

NPT (f), all plumbing

Stainless Steel

ANSI B1.20.1

10 Years

INL-EL-12-NPT

For a more flexible installation, replace the standard

straight hydrant inlet with this 90° elbow. The elbow

inlet shortens the overall length of the hydrant

by 1/2”. Use with any plumbing - NPT is the most

common thread type.

Precision-cast 316L stainless steel. Includes

stainless steel valve reset spring

• Use with any plumbing type

• Replaces the back end (inlet) of your Aquor hydrant

• 100% lead-free 316L stainless steel

• Positionable up to 360° from full lock in any direction

INL-EL-12-NPT

1/2” NPT Elbow Inlet

Still have questions?

We’re here to help Monday to Friday 9AM-4PM PST. Email us at

contact@aquorwatersystems.com or give us a call at (800) 458-1749.

PAGE 1
/2” NPT Elbow Inlet INL-EL-12-NPT For a more flexible installation, replace the standard straight hydrant inlet with this 90° elbow. The elbow inlet shortens the overall length of the hydrant by 1/2”. Use with any plumbing - NPT is the most common thread type. Precision-cast 316L stainless steel.
PAGE 2
1/2” NPT Elbow Inlet INL-EL-12-NPT SKU Installation 1) Remove existing inlet by unscrewing counterclockwise. Ensure the O-ring on the hydrant body is properly seated. Note: DO NOT use Teflon tape on hydrant body threads. This may cause leaks. Only use Teflon tape on plumbing connection (fitting) threads. 2) Hand tighten new inlet on hydrant body by threading clockwise. Note: Elbow inlets can be positioned in any direction by rotating counterclockwise.