Instructions / Assembly

15
AQUASURE PREMIER SERIES
STEP 6. Connecting the System (See Diagram I-1)
Note: Remove all end plugs from the system by following the tting-removal instruction on page 6, and
please follow the proper tting installation instruction to prevent any possible leak.
IMPORTANT! Be careful not to kink any of tubing on the system as kinked tubing can rupture and leak.
1. Connect the WHITE color-coded tubing from the SHOKBLOK protection valve (A) to feed water
adapter (B)
2. Connect the BLACK color-coded tubing from drain water connection (C) to Drain saddle (D)
3. Connect the BLUE color-coded tubing from system (E) to Pressurized Water Storage Tank (F)
4. Connect the BLUE color-coded tubing from the system post lter (G) to faucet adapter (H)
Note: if you purchase the optional extra-output kit, please follow to supplied installation instruction
rst before moving on to the next step.
Instruction continues on the next page
AB
C
D
E
F
G
H
Supply Water Valve
Drain Pipe
Kitchen Counter
Cold water Line
Dia. I-1