Installation Guide

ManualsBrandsAQUASURE ManualsPlumbingHarmony Series 32,000 Grain Electronic Metered Water Softener with Sediment and Carbon Pre-Filter

FORTITUDE V SERIES

WHOLE HOUSE WATER FILTER

OWNER’S MANUAL

FOR MODEL NO.

AS-F110PS

AS-F110CB

AS-F110SCP

AS-F210PSCB

AS-F210SCPKDF

AS-F120PS

AS-F120CB

AS-F120SCP

AS-F220PSCB

AS-F220SCPKDF

Summary of content (12 pages)

PAGE 1
FORTITUDE V SERIES WHOLE HOUSE WATER FILTER OWNER’S MANUAL FOR MODEL NO.
PAGE 2
PAGE 3
TABLE OF CONTENT 2 2 4 INSPECTION & PREPARATION I. Be Familiar with the System Before Installation II. System Operation Parameter and Installation checklist 5 6 6 7 7 8 INSTALLING THE SYSTEM STEP 1. Shutting off the main water supply valve STEP 2. Mounting the system STEP 3. Attaching the water supply pipe STEP 4. Installing the filter STEP 5. System startup 5 9 9 10 10 SYSTEM MAINTENANCE STEP 1. Shutting off the main water supply valve STEP 2. Removing the filter housing STEP 3.
PAGE 4
WELCOME Thank you for choosing Aquasure. Before you start using your Aquasure Fortitude V Series Whole House Water Filter. Please take a few minute to become familiar with the basics. Filter replacement Be Sure to change your Aquasure Filters according to the recommended filter replacement schedule. This help keep your Aquasure Whole House Water System running in top condition. See page XX INSPECTION & PREPARATION I.
PAGE 5
SYSTEM FILTERS: AS-F120PS / AS-F110PS • AF-PS30-4520 / AF-PS30-4510 - 30 Micron Pleated Sediment Filter X 1 AS-120CB / AS-F110CB • AF-CB5-4520 / AF-CB5-4510 - 5 Micron Carbon Block Water Filter X 1 AS-120SCP / AS-F110SCP • AF-SCP-4520 / AF-SCP4510 - Sediment and Carbon Dual Purpose Water Filter X 1 AS-220PSCB / AS-210PSCB • AF-PS30-4520 / AF-PS30-4510 - 30 Micron Pleated Sediment Filter X 1 • AF-CB5-4520 / AF-CB5-4510 - 5 Micron Carbon Block Water Filter X 1 AS-220SCPKDF / AS-210SCPKDF • AF-SCP-4520 / AF-SC
PAGE 6
INSTALLING THE SYSTEM IMPORTANT! Locate and test the main water supply valve to the housing before installing the system. If the main water supply valve fails to shut off the water completely during the test, we recommend contacting your local plumber to fix the valve before begin installing the system. WARNING! If this system is install in a metal (Conductive) plumbing system, i.c. copper or galvanized metal, the plastic components of the system will interrupt the continuity of the plumbing system.
PAGE 7
STEP 1. Shutting off the Main Water Supply Valve 1. Locate the main water supply valve of the house and turn off completely by turning the shut-off handle clockwise. 2. Test to see if the water is completely shut off by turning on the faucet in the cold water position. If the cold water cannot be shut off, please contact your local plumber to fix the valve before begin installing the system. STEP 2. Mounting the System 1.
PAGE 8
STEP 3. Attaching the Water Supply Pipe 1. Wrap the 1” male threaded fittings (Not Included) with 5 to 6 wraps of Teflon tape. 2. Attached the 1” male threaded fitting from the incoming supply plumbing to the IN port and OUT port of the system. STEP 4. Installing the Filter 1. Unwrapped the filter and place it inside the housing and make sure the housing is centering on the stand pipe. 2.
PAGE 9
SYSTEM MAINTENANCE Note: Depending on usage and water quality, you might have to change your filters every 4 - 8 month or 6 - 12 months. It is recommend to change your Stage 1 filter at least every 4 - 6 month for areas with bad water quality. STEP 1. Shutting off the Supply Water Caution! Before working on any system maintenance, prepare clean cloth or microfiber towel to wipe off excess water that might spill during the filter replacement or system maintenance. 1.
PAGE 10
LIMITED PRODUCT WARRANTY Scope: Aquasure takes pride in selling a superb line of products, including this whole house water filter (“Product”). As such, Aquasure expressly warrants to the original purchaser that, for a period of one (1) year from the date of purchase, the product will be reasonably free of defects in materials and workmanship.
PAGE 11
Condition that render this limited product warranty void THIS LIMITED PRODUCT WARRANTY SHALL BE VOID IF: 1. The Product is not operated in compliance with normal municipal water conditions for which the particular model of this Product is intended. 2. The person seeking to invoke the warranty is not the original purchaser. That is, this Limited Product Warranty only extends to original purchasers. 3. The product is purchased used. That is, this Limited Product Warranty only covers new products. 4.
PAGE 12
www.AquasureUSA.com | 818 N Mountain Ave #203c, Upland, CA 91786 | 800.661.0680 | sales@aquasureusa.