Thermostats HEATING 70 72 OWNER’S MANUAL Model S86W MUPR Wi-Fi Thermostat with IAQ READ AND SAVE THESE INSTRUCTIONS
TABLE OF CONTENTS ABOUT YOUR NEW THERMOSTAT �����������������������������3 Thermostat Features �����������������������������������������������3 QUICK REFERENCE TO CONTROLS & DISPLAY �� 4 Home Screen �������������������������������������������������������������� 4 Main Menu �������������������������������������������������������������������� 5 Screen Saver �������������������������������������������������������������� 6 WI-FI SETUP & REMOTE ACCESS �������������������������������7 OPERATION �����������������
QUICK REFERENCE TO CONTROLS & DISPLAY MAIN MENU Main Menu HOME SCREEN Mode Fan Hold UP ARROW EQUIPMENT STATUS HEATING ROOM TEMPERATURE ROOM TEMPERATURE SETTING EVENT STATUS 70 72 BACK SELECT (OPENS MENU FROM HOME SCREEN) AWAY DOWN ARROW Schedule Main Menu Heat Blast Mode Away Fan Humidifier Hold Dehumidifier Schedule Ventilation Heat Blast Air Cleaning Vacation Settings Item availability based on installed options.
WI-FI SETUP & REMOTE ACCESS SCREEN SAVER Starts 45 seconds after inactivity, press any button to wake the screen. For detailed instructions for connecting the thermostat to a Wi-Fi network and registering it to an AprilAire account, refer to the Wi-Fi Quick Start Guide included in the box. Visit aprilaire.com/app for instructions.
OPERATION CHANGE TEMPERATURE SETTING or to 1. From the Home screen press adjust the current temperature setting. SELECT SYSTEM MODE (EM HEAT / HEAT / COOL / AUTO / OFF) 1. Press SELECT to enter Main Menu. 2. Use or 3 Main Menu 3 Mode to select the Mode option. Fan 3. Press SELECT to enter Mode menu: Schedule 4. Use Heat Blast or 1 2 Hold to select the desired mode. 2. The temperature setting will enlarge during adjustment. HEATING 70 3.
SELECT FAN SETTING (AUTO / ON / CIRCULATE) When the fan mode is changed during a program event, it remains in that mode until the next event starts. The fan must be programmed to Fan On in the schedule to run continuously through all events. MAINTENANCE REMINDERS 3 or 1 3 Mode Fan Hold 1. Press SELECT to enter Main Menu. 2. Use Main Menu 2 Schedule to select the Fan option. Heat Blast 3. Press SELECT to enter Fan menu: 4. Use or On: Fan runs continuously.
3. Modes (persistent) INDOOR AIR QUALITY FUNCTIONS EVENT-BASED™ AIR CLEANING (IF INSTALLED) 1. Select Air Cleaning from the Main Menu. Air Cleaning has two temporary events and three persistent modes that can be set. Air cleaning will activate the fan for the purpose of air cleaning. Main Menu 1 Dehumidifier Ventilation Air Cleaning Vacation 2.
AUTOMATIC MODE HUMIDIFIER CONTROL (IF INSTALLED) The thermostat can be configured, through the Installer set-up, to control a humidifier and operate it in one of two modes, either Automatic or Manual. The thermostat will allow you to set a range of humidity based on an outdoor temperature reading (Automatic) or set and hold a value based on a single set point (Manual). 1. Select Humidifier from the Main Menu. 2. From this screen you can select humidity level adjustment or turning the control on or off. 3.
MANUAL MODE DEHUMIDIFIER CONTROL (IF INSTALLED) In Manual Mode, it is important to anticipate drops and react to increases in outdoor temperature to maintain as much humidity as possible while avoiding window condensation. 1. Use TABLE 1 below to determine the proper relative humidity setting. Changes may be necessary several times per day throughout the heating season.
IF DEHUMIDIFICATION IS DONE WITH THE AIR CONDITIONER The thermostat will cool up to 3°F beyond the cooling setpoint for dehumidification. NOTE: overcooling may not be sufficient to meet the dehumidification setpoint. ENERGY SAVING TIP #1: Adjust the setting to be as high as is comfortable to reduce dehumidification run time – if it feels clammy or smells damp or moldy lower the setting. To save energy, turn the dehumidifier control OFF when you open your windows just as you would with air conditioning.
Ventilation has two temporary events and two permanent modes that can be set. PROGRAM SCHEDULE AND HOLDS 3. Events (temporary) 3 Hours: Ventilation will be constantly energized for 3 hours and then the fresh air mode will return to Auto or Off depending on which mode was most recently active. This option is used when fresh air is needed. Example: To dilute unwanted cooking odors.
UNDERSTANDING PROGRAM SCHEDULES The daily schedule is split into four sections: Wake: Temperature you would prefer to wake up to. Leave: Temperature when you are away from the house. Return: Temperature you would prefer to return home to. Sleep: Temperature you would prefer while sleeping. Event 1: Optional additional event enabled in app only. Event 2: Optional additional event enabled in app only. The times and temperatures shown in TABLE 2 are the defaults.
HOW TO MODIFY PROGRAM SCHEDULES 5 1. From the Schedule option in the Main Menu, you can turn the schedule on or off, and make changes to the schedule. 5. Adjust Leave details and/or select Next to proceed. Mode Modify: The event start time, temperature, fan mode, and controlling sensor (if installed) can be adjusted for each event of each day. On/Off: When the Schedule is turned Off the thermostat will continue to control at the current temperature setting until adjusted with and . 2.
HEAT BLAST® (IF INSTALLED) Heat Blast® will raise the current room temperature 3°F to 5°F based on the installer set-up, and then resume normal operation. To activate Heat Blast, select Heat Blast from the Menu, and use the Select button to set the toggle to ON. NOTE: Heat Blast button is only available if it is enabled in the Installer Setup and the thermostat is in Heat or Emergency Heat mode. To cancel Heat Blast, select Heat Blast from the Menu, and use the Select button to set the toggle to OFF.
WI-FI MAINTENANCE AND TROUBLESHOOTING CLEARING ROUTER SETTINGS If you purchase a new Wi-Fi router or change the security settings on your existing router, the router settings in the thermostat need to be cleared so the new Wi-Fi router settings can be entered. To do this, enter the Wi-Fi settings menu (Menu > Settings > Wi-Fi). Then select Disconnect. This will remove all the previous Wi-Fi connection settings.
SETUP MENU TABLE 3 – USER SYSTEM SETTINGS TABLE LIMITED WARRANTY Your Research Products Corporation AprilAire® Thermostat is expressly warranted for five (5) years from date of installation to be free from defects in materials or workmanship.
FCC AND ISED COMPLIANCE STATEMENTS Contains FCC ID: TFB-1003 and QOQGM210P Contains IC: 5969A-1003 and 5123A-GM210P This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada’s Licenseexempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.