Overview of Primary Product

Specification Sheet
model 8140nf
freSh air intake ventilator
PRODUCT SPECIFICATIONS
Overall Dimensions
Not Including Collars
4.5”H x 10.5”W x 11.8”L including control
Inlet Collar 6” Round
Outlet Collar 6” Oval
Ventilation Time Dial Setting Off, 15-60 minutes, Test/Reset
Ambiant Temperature 0°F to 160°F
Outdoor Temperature
Limit Settings
Setting A, no limit, time only
“B”, 105°F high limit, 20°F low limit
“C”, 100°F high limit, 30°F low limit
“D”, 95°F high limit, 40°F low limit
Voltage 115 VAC, 1 phase, 60 Hz
Power Includes 5’ power cord with 5-15P plug
Ducting 6” diameter flexible insulated duct
Warranty 5 years
FEATURES
• Unit is designed, when properly installed, to achieve ASHRAE
Standard 62.2 2010
• Complies with 2012 IECC (2.8 cfm/watt)
• Control is integrated into the Ventilator
• High and Low Temperature Limit Lock-outs while maintaining
ASHRAE 62.2 2010
• Simple plug-in installation
• Installation temperature range up to 160°F
BENEFITS
• The precise amount of outside air needed in today’s efficiently
designed homes is delivered
• Optimize energy savings by locking out ventilation during
hottest/coldest times of the day
• Improves indoor air quality
• Robust design handles hot attics
• Installation labor reduced, requires only a switched outlet and
24 volt wiring to HVAC system
• Furnace or air handler does not require an ECM motor
When properly installed and set, the Aprilaire Model
8140NF Fresh Air Intake Ventilator will meet the
mechanical ventilation requirements of:
• Energy Star Certified Homes, Version 3
• EPA Indoor airPLUS, Version 1
• 2012 International Residential Code (IRC)
• 2012 International Energy Conservation Code (IECC)
10.50
13.13
15.00
6.63
4.50
11.88
13.41