User Guide

Questions? Call 877.265.2426 TRACK YOUR PROGRESS | 17
After the desired network is found, turn the knob to select this Wi-Fi network. Press
the knob to access the Wi-Fi Password menu. The password can be entered using
the letters and numbers on the password grid. Upper and lower case letters can
be toggled by using the Arrow key in the upper left corner of the grid. After the
password is entered, turn the knob until the cursor highlights the “Return/Enter” key
in the lower right corner. Press the knob to connect to the Wi-Fi network. It may take
up to 15 seconds to connect to the network.
If the Wi-Fi network is connected successfully, the screen will return to the Wi-Fi
set-up menu displaying “Connected” to the Wi-Fi network name, and the Wi-Fi
symbol will appear in the top of the status bar at the top of the display screen.
The indicator light on the Wi-Fi module will also illuminate.
To switch from one Wi-Fi connection to another, simply select the new desired
network and repeat step 4.
If the desired network does not require a password, simply select the
“Confirmation/Enter” key to connect.
If the wireless router supports WPS, turn the knob in the Wi-Fi set-up menu until
the cursor highlights the WPS Option. Press the knob, the display will now show
the WPS set-up menu. Follow Step 1 instructions to press the WPS button on the
wireless router. Then follow Step 2 instructions to press the WPS button on the Luna
Wi-Fi module to connect to the Wi-Fi network. Note: Connection may take up to
15 seconds.