Technical Specifications

KNOCKING CAULKING
Less mess!
Fiber Cement manufacturers are now recom-
mending that butt joints not be filled with caulk.
Aluminum seam covers are the most attractive
alternative. H-Molulding joint covers protect
butt joints and elegantly provide an expansion
joint to help prevent buckling or distortion.
Less Maintenance
Caulking can, and will shrink. Eventually it will
fall out creating an endless maintenance night-
mare. Pre-finished aluminum joint covers solve
the maintenance headaches before they occur.
Better Appearance
While caulking comes in may colors, the sheen
difference between the caulking and the siding
will be apparent even through a coat of paint.
It pays to do it right.
Make your next siding job a clean and profes-
sional, caulking-free experience. You'll be
rewarded with a job that stands the test of time.
1905 W. Haskell Street, Appleton, WI 54914 • 800-558-3414
ANGLE FLASHING 1" x 3" x 10' Aluminum
DRIP CAP
1" x 1 5/8 x 10' Aluminum
Z-FLASHING
3/8" x 10' Aluminum
Modern Green Nickel
Red Mountain
Sandy Clay
Biscayne Blue
Grecian Stone
Falmouth Gray
Misty Blue
Smokey Sable
Snow White
Rustic Silver
Wicker Rocker
1400290
1400291
14002921400293 1400294
1400295 1400296
1400297
1400298
1400299
1400300
1400301
Modern Green Nickel
Red Mountain
Sandy Clay
Biscayne Blue
Grecian Stone
Falmouth Gray
Misty Blue
Smokey Sable
Snow White
Rustic Silver
Wicker Rocker
1400270
1400271
14002721400273 1400274
1400275 1400276
1400277
1400278
1400279
1400280
1400281
Modern Green Nickel
Red Mountain
Sandy Clay
Biscayne Blue
Grecian Stone
Falmouth Gray
Misty Blue
Smokey Sable
Snow White
Rustic Silver
Wicker Rocker
1400250
1400251
1400252
1400253
1400254
1400255 1400256
1400257
1400258
1400259
1400260
1400261
NO CAULK
SIDING ACCESSORIES
For Fiber Cement
& SmartSide
®
Siding
Aluminum PPG color matched metal trims provide an
easy to install and long-lasting method of stopping
water penetration behind sidings and trim boards.
Commonly used at panel intersections and other vertical surfaces
when stacking two courses of panels without an overlap on a
gable or eave wall were a seamless application is impossible
due to wall height.
Used as Window or Door Flashing-used over the top of window
and door trim boards, band boards and panel intersections.
Designed to provide a minimum of 2" clearance between Fiber
Cement and Engineered Wood siding products and roofs, decks,
paths, steps, driveways or any other solid surfaces.