Specifications

Take Apart Processor Module - 69
Replacement Note: Position the processor module evenly
over the processor module slot and make sure the card is
seated evenly. Press down gently on the processor module to
install it. Never force the module into place or you may
damage the gold connector pins on the underside. Flip down
the metal lever that secures the processor module to the
board.
Replace the heat sink on top of the processor module. Secure
the heat sink by inserting the clip into the slot at the rear of
the processor and then swinging the clip down over the heat
sink. Press the clip into the front latch to fasten in place.