Specification

SUBMITTAL SHEET
Irrigation Fittings
Blue Twister®
IRRIGATION
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative:
The self-threading Double Helix® design of Blue Twister® irrigation ttings provides
eortless insertion into PE pipe. No longer is there a need to hammer or walk them
into the pipe. Just twist the tting clockwise into the pipe and let the Double Helix®
pull the pipe onto the tting.
Once the pipe has covered all of the barbs you are assured a connection that does not
leak and will withstand the water pressure of your installation.
Features:
• Designed for easy installation without tools.
• Patented self-threading Double Helix® design provides effortless insertion into polyethylene (PE) pipe.
• 100% corrosion resistant.
• Not compatible with compressed air or gases.
• Suitable for underground applications.
• No restriction on number of connections that can be made to achieve desired pipe length.
• Most secure connection requires a hose clamp.
Specications:
• 160 psi @ 73º F
• Made from polypropylene plastic.
• For use with polyethylene pipe (PE).
• For use with cold water applications only.
Approvals:
• ASTM D-2609
• NSF 61 for potable water
• ANSI/NSF 14 & 7
Installation:
Squarely cut PE pipe to desired length. Slide clamp over end of pipe. Twist fitting clockwise into the pipe
until all barbs are covered by pipe. Slide clamp 1/8"-1/4" from the end of the pipe and over the fitting
barbs closest to the end of the fitting. Fasten clamp. Check connections after installation.