Use and Care Manual

ManualsBrandsApmir ManualsBath20 in. W x 28 in. H Rectangular Framed Front, Back LED Lighted Anti-Fog Wall Bathroom Vanity Mirror in Tempered Glass

Table Of Contents

空白页面

FRAMED LED MIRROR

With Front and Backlit

User Manual

Before Installation

Thank you so much for choosing our mirrors, in order

to facilitate the use of our products, please read this

instruction carefully before installation.

Please Notice:

1. Please read all instructions carefully before assembling the item.

2. After opening the package, inspect the product immediately upon receipt

for transit damage or missing parts.

3. Please power the mirror with plug to test all its functions before installing on

the wall.

4. Assembly by two or more adults is highly recommended.

5. Disconnect power before installing, adding or changing any components.

6. Ensure that the fixing location is able to take the weight of the complete fitting.

7. Keep the voltages 110V-120V. If the voltage exceeds 120V, please use

transformer.

8. To connect the wires to electrical junction box, a qualified technician or

electrician is highly recommended.

Please check and make sure below functions work

properly before installation

Summary of content (4 pages)

PAGE 1
FRAMED LED MIRROR With Front and Backlit Before Installation Thank you so much for choosing our mirrors, in order to facilitate the use of our products, please read this instruction carefully before installation. Please Notice: 1. Please read all instructions carefully before assembling the item. 2. After opening the package, inspect the product immediately upon receipt for transit damage or missing parts. 3. Please power the mirror with plug to test all its functions before installing on the wall. 4.
PAGE 2
Product Functions Package Contents Bracket x2 Wall Anchors x4 Screws x4 Plug LED Mirror Installation tools you may need Anti-fog switch Dim switch Backlit switch Anti-fog switch:After connecting the power, the anti-fog function is already turn on automatically. If you don't need to use it, just touch it to turn it off, to prevent wasting energy. The defogging will take effect within 10 minutes after it's turned on and close in 1 hour, so you can turn it on 10 minutes before taking a bath.
PAGE 3
Product Specifications Product Specifications Parameter W 04 Specification 05
PAGE 4
Troubleshooting Installation Instruction Method 1: Plug in Method 2: Hardwire There are three power wires behind the mirror Neutral Wire (Usually white, red or blue.) LED doesn't turn on / Defogging doesn't work Ground Wire (Usually green or chartreuse.) Live Wire Insert the plug into the socket, keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer. (Usually black or dark brown.