User Manual

ManualsBrandsApexDesk ManualsFurnitureApexDesk FX-66APP-MOCHA Flex Pro 66" Series Sit to Stand Desk Memory Controller

Flex Pro Series Assembly Guide

Table of Contents

CAUTION, USE & LIABILITY ........................................................................................................... 2

PARTS & HARDWARE LIST ............................................................................................................ 3

PARTS / COMPONENT DIAGRAMS ........................................................................................... 3

ASSEMBLY INSTRUCTIONS ......................................................................................................... 5

BLUETOOTH ...................................................................................................................................... 10

TROUBLESHOOTING ..................................................................................................................... 11

WARRANTY INFORMATION ......................................................................................................... 12

ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK

Summary of content (11 pages)

PAGE 1
ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK Flex Pro Series Assembly Guide Table of Contents CAUTION, USE & LIABILITY ........................................................................................................... 2 PARTS & HARDWARE LIST ............................................................................................................ 3 PARTS / COMPONENT DIAGRAMS........................................................................................... 3 ASSEMBLY INSTRUCTIONS .......
PAGE 2
CAUTION, USE & LIABILITY CAUTION Make sure no obstacles are in the desk’s path. Make sure the desk top is not touching any walls. Make sure all cords are of appropriate lengths to accommodate the change in desk height. Read and understand this manual before attempting to install or operate. This product is not intended for use by young children or for those who require supervision Do not sit or stand on the desk. Do not crawl or lie under the desk.
PAGE 3
PARTS & HARDWARE LIST TOOLS REQUIRED 4mm Allen Wrench Phillips screwdriver (not provided) Ref # QTY DESCRIPTION E1 14 M6x15mm Machine Screw w/Lock & Flat Washer E2 20 5x20mm Wood Screw E3 10 4mm Set Screw E4 1 4mm Allen Wrench E5 7 M6x20mm Machine Screw IMAGE COMPONENT DIAGRAMS No.
PAGE 4
ASSEMBLY INSTRUCTIONS BEFORE YOU BEGIN 1. Lay out all components and hardware to ensure that you have everything listed on Page 4. 2. The desk weighs over 100 lbs. Two people are needed to turn or move desktop and some components. When turning or moving the assembled desk, grab it by SUPPORT BRACKETS (not the desk top). 3. Assemble on soft and non-abrasive surface to avoid scratch or damage to the desk top. STEP 1: INSTALLING DESK SUPPORT BRACKET 1) Unfold legs. 2) Slide in Desk Support Bracket.
PAGE 5
STEP 2: INSTALLING DESK FEET Use 4mm Allen wrench to secure each foot to column with four machine screws (E1) and washers. Insert 8 set screws (E3) into the frame – 4 on each side. Don’t tighten those screws now.
PAGE 6
STEP 3A: MOUNTING DESK TOP (with matching top from us) Place desk top on a ﬂat and non-abrasive surface with holes facing up. Carefully place assembled frame onto the desk top. The frame is heavy. Two people are needed to move it and to turn the desk over after it is assembled. Align the holes on the support brackets to those pre-installed anchors on the desk top if you are using the matching top from us.
PAGE 7
STEP 4: CONNECTING CABLES Use following diagram as a guide 1) Connect Height Controller cable (7) to Control box (6). 2) Connect two motor cables to Control Box. Motor cables can be plugged into either port interchangeably. The motor whose cable is plugged into the port next to power cord is #1 motor while the other one is #2. You may need to switch cables at control box when troubleshooting. Please refer to troubleshooting section for details. 3) Plug power cord to Control Box.
PAGE 8
STEP 5: INITIALIZING SYSTEM & SETTING HEIGHT POSITION Up Button Down Button Setting Button 3 Preset Position Buttons DESK MUST BE INITIALIZED BEFORE YOUR FIRST USE, and may need to be re-initialized (reset) from time to time to work properly. Use Height Controller to initialize. If your desk has Bluetooth option, initializing and programming can also be done with your phone. Please go to PAGE 10 more detailed instructions. INITIALIZATION: Press and hold Down Button until RST appears on the display.
PAGE 9
BLUETOOTH Down Icon Up Icon Height Setting Icon Reset Icon Setting Icon INSTALL APP TO YOUR PHONE: Search Apexdesk in Apple or Google APP store and download APP to your phone. Apexdesk logo will appear on your phone once downloaded. CONNECTING TO DESK VIA BLUETOOTH: Open APP on your phone and stay within 15 feet of the desk. Devices ADJUST163xxxx will appear on your phone screen. Touch to connect. Once connected, the Bluetooth symbol on the far right corner will turn from red to blue.
PAGE 10
TROUBLESHOOTING Issues/Error Message Desk does not go up or down. The controller illuminates when any button is pressed. Desk does not go up or down. The controller does not illuminate when any button is pressed. Desk is unusually noisy Columns do not go up evenly Desk does not reset Overheat (on Bluetooth device) Overload (on Bluetooth device) Motor Jam (on Bluetooth device) Motor Speed Malfunction (on Bluetooth device) Motor Wire Malfunction (on Bluetooth device) Solution Unplug the power cord.
PAGE 11
WARRANTY INFORMATION SCOPE OF WARRANTY Apex Furniture LLC (“ApexDesk”) warrants to the original purchaser its new desk (except for components not warranted under “Exclusions”) manufactured by ApexDesk to be free from defects in material and workmanship under normal use and service.