User's Manual

Chapter 6. The Web GUI
6–20
10004880 Rev. D1
Figure 6-17 NAT General Page
If the WEB HTTP interface is used to change the NAT IP address, please reset the Sub-
scriber Unit for it to take effect.
Use the NAT Configuration page to define local servers. All fields are required. After spec-
ifying the parameters for a particular server, click Add. The NAT Configuration page can
then be used to define another server.
Once a server has been added, it will be included in the list on the NAT Servers page. From
this page, servers can be deleted if desired. To delete a server, click on the box at the
beginning of the row describing the server; then click Submit.
The NAT Static Mappings page can be used to build a table of static mappings of local IP
addresses to global IP addresses. To add a static address mapping, click on the Add Map-
ping button and specify the local and global IP addresses. To remove a mapping from the
table, select the mapping in the table and click on the Delete Mapping button.