Manualshelf

Instructions / Assembly

ManualsBrandsAPEC Water Systems ManualsKitchenEssence Reverse Osmosis Under Counter UV Disinfecting 75 GPD 6-Stage Drinking Water Filtration System
11121314151617181920
17
3. Wait for tank to fill: Before usage, allow the tank to fill. Tank normally takes 2-3 hours to fill.
When the tank is filled, the RO will shut off automatically.
4. Drain Tank: Do not use the first tank of water! Drain it out to flush the system and
new filters. Lift the faucet lever up into a locked position to drain tank. Let the
tank refill again and the pure water is ready for use.
5. Clean up area: Allow the system to run while cleaning up tools and work area.
6. Check for leaks! Make sure no leaking at joints, fittings, valves, and tubing connections.
Congratulations! You have successfully installed the Reverse Osmosis System!
* * * End Installation Section * * *
Step 7: System Start-Up
1. Turn on feed water: Slowly, turn on your Cold water supply. Open the Needle Valve (turn counter-
clockwise) to allow the raw water to enter the system. Check for leaks!
2. Open tank valve: Open the tank’s ball valve to allow water to enter the tank. The tank’s valve is
“On” when the valve handle is parallel (in the same direction) with the valve’s outlet (see Fig. 12).
Check for leaks!