User manual

Network Management Card & Modbus/Jbus 34022321XT indice :AD Page 79/91
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
Description of the physical quantity Word (hex) Unit
Output frequency 141 dHz
Battery backup time (Nota 1) 149 Min
Battery temperature (Nota 1) 14A °C
Battery charging level (Nota 1) 14B %
U AC normal (phase 1) (Nota 1) 150 V
U AC normal (phase 2) (Nota 1) 151 V
U AC normal (phase 3) (Nota 1) 152 V
Number of battery block (Nota 1) 153 -
Total battery capacity (Nota 1) 154 Ah
Nominal Apparent Power 209 kVA
Nominal battery voltage (Nota 1) 213 V
Nota1 : This Information is not present in a Static Switch Cabinet.
Nota2 : For a configuration with UPS in parallel with SCC unit, the Main 2 data need to read on the card installed in the SSC unit.
10.3.3 Product information table
Information description Word (hex) Example
Manufacturer name 1A0
« Schneider Elec. »
Product name 1A8 « GALAXY 7000»
UPS model 1B0 «400 »
Serial number 1B8 « AN2E49008 »
10.3.4 Environnement Sensor Table
10.3.4.1 Sensor Status table
Status description Status to 0 Status to 1
Word
(hex)
Bit
(0-
15)
Communication fault no Yes 45 0
Alarm : temperature too high no Yes 45 1
Alarm : temperature too low no Yes 45 2
Alarm : humidity too high no Yes 45 3
Alarm : humidity too low no Yes 45 4
Input 1 alarm no Yes 45 5
Input 2 alarm no Yes 45 6
Input 1 open Closed 48 0
Input 2 open Closed 48 1