Specifications

150 kW InfraStruXure Power Distribution Unit 31
Route Data Cables to the InfraStruXure
Manager Hub (or Switch)
1. Connect a CAT-5 network cable (provided) to the designated 10 Base-T ports on your APC
InfraStruXure devices. The following devices need to be connected:
2. Route the connected CAT-5 network cables through the data cable troughs to the InfraStruXure
Manager Hub (or Switch).
3. Connect each device’s network cable to any available station port in the InfraStruXure Manager
Hub (or Switch). Station ports are those with an x after the number (e.g., 2x).
Automatic Transfer Switch
Rack PDU Environmental Monitoring Unit
InfraStruXure PDU