Installation guide

46 Installation Guide Silcon DP300E 208V/480V 10-80 kVA
7OY0002 US rev. 04
6.3.3 Programming example - change to output isolation transformer
present*
Action Display shows
1. Press
and simultaneously to open
for password input
2. Enter password 28 28 28 by pressing
3. Press or until
4. Press
for change
5. Press
to store
6. Wait about 1 second
7. Press
to exit
*For charge voltages, battery warnings and shut down voltages and high battery
temperature the parameter is changed by entering the actual value like example
6.3.2. The other parameters are selected by pressing the
key as step 4 in example
6.3.3. - one or more times.
Programming parameters
Key in password
:
Last selected
parameter
Isolation trafo output
: NO
Isolation trafo output
: YES
Data stored
Normal operation
load power XX%
Isolation trafo output
: YES