Installation Guide of FM56-SV Soft PCI Modem Support O/S 1. Windows 9x 2. Windows ME 3. Windows 2000 4. Windows NT 5. Windows XP System Requirements CPU: l Pentium 166 MHz or higher (Pentium 200 MHz MMX require for V.
Hardware Installation 1. Turn off the computer. No power must be applied to your computer when you install the internal modem, or the computer could be damaged. 2. Make sure you can freely access the back of the personal computer. Remove the computer cover. 3. Select any available PCI slot into which you can install the internal modem. 4. Unscrew and remove the slot cover. 5.
Software Installation Installation Procedures for Windows 9x 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects the modem, the message "This wizard searches for new drivers for: PCI Communication Device" is displayed. Click Next. 2. To search for the best drivers for your device, click Next. 3. Insert the driver CD into your CD-ROM drive and then specify the location: F:\Drivers\FM56-SV\Win9x (F is your CD-ROM drive.) and then click Next.
. Windows will show the message ”Windows driver file search for the device “AOpen PCI Modem Enumerator” and show the location of driver. Click Next 5. Click Finish to complete the installation.
Installation Procedures for Windows ME 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects the modem, the message "Windows has found the following new hardware: PCI Communication Device" is displayed. Select “Automatic search for a better driver” or ”Specify the location of the driver”. Insert the driver CD into your CD-ROM drive and then click Next. If you select ”Specify the location of the driver”.
Installation Procedures for Windows 2000 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects the modem, the wizard will help you to install the new device. Click Next to begin installation. 2. Select “Search for a suitable driver for my device”. Then click Next. 3. Select “CD-ROM drives” or “Specify a location”. Insert the driver CD into your CD-ROM drive and then click Next.
4. Wizard will find the correct driver for the new device. Then click Next. 5. Windows has finished installing the software. Click Finish to complete the installation.
Installation Procedures for Windows NT 1. Insert driver CD into your CD-ROM drive and then double click Setup icon from the path: F:\Drivers\FM56-SV\WinNT. (F is your CD-ROM drive.) 2. You will see the Modem Board Installation Wizard and then click Next. 3. Wizard will install the modem driver of AOpen FM56-SV Soft PCI Modem. Click Next to go into next step.
4. Click Finish to complete installation.
Installation Procedures for Windows XP 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects the modem, the wizard will help you to install the new device. Select “Install the software automatically” and insert driver CD into your CD-ROM drive. Then click Next. Windows will install the driver automatically. 2. Click Finish to complete the installation.