User Guide

AMI BIOS Utility
3-4
Installed. Select Auto to automatically configure the installed hard
disk or IDE device. Select CD-ROM if you have a CD-ROM installed in your
system. If you have an old type HDD installed, you may need to enter the
HDD parameters manually. To do this, you must set this parameter to User.
Set this to Not Installed to bypass the function.
LBA/Large Mode
This enhanced IDE feature allows the system to use a hard disk with a capacity
of more than 504 MB. This is made possible through the Logical Block
Address (LBA) mode translation. Set the parameter to Off to disregard the
feature.
This parameter becomes nonconfigurable when the HDD Type parameter is set
to Auto.