Specifications

Operations | Reference Manual
FocalSpot, Inc. | www.FocalSpot.com
Page | 94
Calibration Buttons
(AOI Mode)
Calibration Buttons are used to select
optical calibration based the top three
ledges of the standoff post (15, 20 and
25mm).
Best Practice: The best focus, lighting
and scan detail, is calibrated for 20mm
stand-off. Therefore, always use this ledge
whenever possible.
Directory Browser
The Directory Browser is used to identify
where inspection routines are saved or
retrieved, on local or network drives.
Double-click to open the browser navigation.
Browse to the location and click on “Use
This Directory” to set.
File Browser
The File Browser is used to choose a
predefined PCB inspection routine from the
list of files in the selected directory.
Setup Information Display
The Setup Information Display presents
supervisor notes entered during the test
setup which are specific to the PCB
inspection routine selected in the File
Browser.