Brochure

23
PROLINE
®
MOBILE HOME
DIRECT VENT
Complies With HUD Standards For Manufactured Housing
Installation
Gas Control Convertible for Natural and Propane Gas
• For flexibility to meet the varying needs of manufactured housing installations.
Direct Vent Models Package with Bottom Intake Air Vent
• To draw all combustion make-up air from outside the structure.
Optional Ducted Air Inlet Kit for Direct Vent Models
• For use when water heater is installed over a basement.
• Provision for horizontal air inlet ducting.
Side-Mounted 3/4” Cold Water Inlets
Green Choice
®
Gas Burner
• Patented eco-friendly burner design reduces NOx emissions by up to 33% and complies with
Low-NOx emission requirements of less than 40 ng/J.
Dynaclean
™
Diffuser Dip Tube
Coregard
™
Anode Rod
Enhanced-Flow Brass Drain Valve
Blue Diamond
®
Glass Coating
Code Compliance
• Meets UBC, CEC and HUD National Codes.
• Meets the thermal efficiency and standby loss requirements of the U.S. Department of
Energy and current edition of ASHRAE/IESNA 90.1.
• Complies with the Federal Energy Conservation Standards effective April 16, 2015, in
accordance with the Energy Policy and Conservation Act (EPCA), as amended.
Design-Certified by CSA International
• Certified at 300 psi test pressure and 150 psi working pressure. Listed according to ANSI
Z21.10.1-CSA 4.1 standards governing storage tank-type gas water heaters.
CSA Certified and ASME Rated T&P Relief Valve
6-Year Limited Tank and 2-Year Limited Parts Warranty
• For complete information, consult written warranty or go to hotwater.com.
All models ship from the factory for use with natural gas, a complete propane burner is supplied for converting to propane gas.
No option available for top T&P.
Water connections-3/4” on all models.
All models approved fro installation from sea level to 5,400 ft. elevation.
Model
Number
Gallon
Capacity
First
Hour
Rating
Gallon
Energy
Factor
Btu Input
Per Hour
Natural
Gas
Btu Input
Per Hour
Propane
Recovery @
90°F Rise
Gallon Per
Hour
Dimensions in Inches
Approx.
Shipping
Weight
(lbs)
Insulation
Height
to Top of
Draft Hood
Height
to Top of
Tank
Diameter
Vent
Outlet
FMDV-30 30 49 0.63 30,000 29,000 31 2 61 58 18 3 129
FMDV-40 40 60 0.62 32,000 29,000 33 2 61-3/4 58-3/4 20 3 153
FMDV-50 50 74 0.60 40,000 37,000 39 2 60 57 22 3 168