Brochure

35
DRE/DVE Electric
Gold and Gold Xi
ELECTRIC WATER HEATERS
Gold and Gold Xi DRE/DVE series available with 50, 80, and 119 gallon storage tanks, with input choices ranging from 6 kW
to 54 kW. They can be used as recovery heaters for hot water supply service
or as boosters for supplying sanitizing rinse water for dish washing.
APPROX.
MODEL GAL. KILOWATTS HEIGHT DIA. SHIP
NO. CAP. MAXIMUM WEIGHT
STD. ASME
DVE/DRE-52 50 54 55-3/4 21-3/4 265 316
DVE/DRE-80 80 54 60-1/4 25-1/2 280 325
DVE/DRE-120 119 54 62-1/4 29-1/2 390 416
All dimensions in inches
See specification sheets or contact your local rep for optional KW’s available.
Goldenrod
®
24k gold-plated
Elements Standard
n
Superior scaling resistance,
resulting in long term efficiency
and damage protection
n
Element sizes from 2 kW to
6 kW using 3, 6 or 9 elements
provide input options from
6 kW to 54 kW, recoveries
from 25 GPH to 221 GPH at
100°F rise
Power Circuit Fusing For
System Protection
n
Safeguards elements and
contactors from short circuits,
overloading and line surges
n
Meets National Electrical Code
requirements that non-ASME
tanks must have internal fusing
when current draw exceeds
48 amps
208, 240 and 480V Options For
Easy Installation
n
Single-phase and 3-phase delta
n
Field-convertible voltages 3-phase
to single-phase (and vice versa)
except for 208V/54 kW
n
277V single-phase also available
Factory-Installed Terminal Block
n
Provide electrical service to heater
and connect to block
3-Year Limited Tank Warranty
n
5-year limited tank warranty
optional
Other Standard DRE/DVE
Features
n
Two anode rods for maximum
corrosion protection
n
Simplified circuitry, color coded
for ease of service
n
Bonderized undercoated baked
enamel finished cabinets
n
Brass Drain Valve
n
CSA/ASME temperature and
pressure relief valve
Compliance
n
Meets the standby loss
requirements of the U.S.
Department of Energy and
current edition of
ASHRAE/IESNA90.1
DRE Gold Model Controls
n
DRE Gold models have surface
mount temperature controls
adjustable 120° to 180°F.
n
Manual reset high-temperature
cutoff
DVE Gold Xi Model Features
Advanced Electronic
Controls
n
iCOMM
™
Compatible and can be
monitored from remote locations.
Call 1.888.WATER02 for more
information.
n
Plain English text and animated
icons.
n
Displays detailed operational
and diagnostic information
n
Fault or alert messages appear
if an operational issue occurs
n
Last 9 fault and alert messages
saved with time stamp.
Heavy-Duty Magnetic
Contactors
n
UL-rated 100,000 cycles
Economy Mode Operation
n
Control system automatically
lowers the operating set point by
a programmed value during
user-defined time periods
n
Helps reduce operating costs
during unoccupied or low
demand periods
Precise Temperature
Regulation
n
Operating Set Point adjustable
90° to 190°F
n
Banks of heating elements (3
elements per bank) are energized
according to adjustable (1
˚ to 20˚)
differential set points for each
bank. Helps reduce short cycling
and operating costs by matching
kW output to load conditions
n
Linear sequencing - first bank
on is last bank off
n
Helps reduce current surge/spikes
and avoid peak demand charges
n
Helps reduce operating costs
during low load conditions
n
Manual reset high-temperature
cutoff
(DVE Models Only)
ASME/CRN
(optional)
DRE Model
DVE Model
AOSCA80000 R July 2014 Commercial Catalog_108078_ResidentialFul#7A635.qxd 7/16/14 4:28 PM Page 35