Brochure

12
BLN Gas Ultra-Low NOx
Single Flue Models
80% Thermal Efficiency
The BLN-80 commercial gas water heater complies with
California SCAQMD Rule 1146.2 and other Air Quality
Management Districts with similar NOx emission
requirements of 14 ng/J or 20 ppm. This model is equipped
with a pre-wired, factory-mounted blower. This blower
provides more efficient control of heat and helps ensure an
adequate supply of make-up air. Prior to ignition, the
control proves a working draft.
Factory-Installed Blower
n
Control proves draft prior to ignition
n
No draft hood or barometric damper required
n
Blower is factory-mounted with a 6-foot power cord:
requires 120V, 3 amp or less electrical system connection
Intelli-Vent
™
Gas Control
n
Equipped with nearly indestructible silicon nitride hot
surface ignitor
n
Advanced electronics for precise control of water
temperature
n
Easy-to-understand system diagnostics
Rated as Category I Appliance
n
Category I appliance: uses standard metal, single-wall or
“B” type vent
n
May be common vented with other Category I
appliances
n
Vent connects directly to blower outlet
Fully Automatic Control System
n
Auto-reset gas shutoff device prevents excessive water
temperature
n
Adjustable thermostat with 120°F - 180°F range
n
Gas pressure regulator
Glasslined Tank
n
Exclusive CoreGard™ anode rods with stainless steel
core provides additional corrosion protection
Handhole Cleanout
n
Allows easy access to tank interior for cleaning
CSA Certified and ASME Rated T&P Relief Valve
3-Year Limited Tank Warranty
Intelli-Vent™ is a Registered Trademark of Emerson Electric Company
MODEL
NUMBER
GAL.
CAP.
BTU INPUT
PER HOUR
RECOVERY
GPH/°F
TEMP. RISE
DIMENSIONS
IN INCHES
APPROX.
SHIPPING
WEIGHT
(LBS)
40 100 140 HEIGHT* DIAMETER
BLN-80 74 75,100 182 73 52 65-7/8 25-1/4 300
*Height to top of blower
AOSCA80000 R July 2014 Commercial Catalog_108078_ResidentialFul#7A635.qxd 7/16/14 4:26 PM Page 12