Instructions / Assembly

11. Affix the Rollers (04) to the Glass Door (05). Hang the Rollers onto
the Upper Guide Rail (03) to suspend the door. Slide the lower edge
of the Glass Door into the groove found on the Guide Block (12). Make
necessary adjustments to the fasteners to guarantee the lower edge of
the Glass Door does NOT touch the bottom of the Guide Block.
Secure the door to the Upper Guide Rail by mounting the two Roller
Guards (20) on the door.
12. See Step 8 for details on cutting the Threshold Cover (14) to size.
Place the Threshold Cover onto the threshold while the door is open.
Refer to Figure 13 for details.
13. Attach the Anti-Water Strip (17) to the vertical edges of the Stationary
Glass (02) and Glass Door (05). Press the Bumper Strip (13) onto the
vertical edge of the Glass Door. Affix the Handle (06) to the Glass Door.
Make necessary adjustments to each Door Stopper (01) to guarantee
they are positioned upright and the Glass Door allows for optimal range
for opening and closing. Fasten the screws in place by tightening them.
ROLLERS