Instructions / Assembly

1. Take a precise measurement of the distance between the two
completed walls. This distance is labeled as “W” on the diagram.
Refer to Figure 1 for details.
2. For your convenience, the Upper Guide Rail (03) has been precut for
shower models with a width of 48” or 60”.
Wall-to-wall openings with a width (W) equal to the size of the shower
model does not require you to cut the Running Rail (03). Simply continue
to Step 3.
Wall-to-wall openings with a width (W) less than the size of the shower
model will require you to cut Upper Guide Rail from the end farthest from
the holes of the Glass Brackets (07).
(L) is used to refer to the length. To determine the length (L): Subtract (W)
from the size of the shower model.
Measure
this
distance
Distance
Measured
Figure 1
MEASUREMENTS