Ceiling Fan with Lights Installation Video Applicable APP Control Applicable
Packing List Name QTY ① ③ ② ④ Name ① Mounting Bracket 1 ③ Remote Controller 1 ② Ceiling Fan 1 ④ Hardware Bag 1 NOTE: 1. Ceiling fan ② style may be different from the diagram. 2. Remote control requires AAA 1.5V battery x 2pcs (not included).
Safety Rules 1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock. 2. A qualified licensed electrician is required for the installation. 3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds.
Installation Video Scan for online installation video Note: Product in the video may be different from this one. 1. Installation Preparation Tools You Need Ladder Pliers Wire Strippers Screwdrivers Power Drill (optional) Drill Bit (optional) If mounting to a support structure, you will also need the optional tools. What to Expect with Your Installation You may need a friend to help you. 30 inches from blade tip to nearest wall or obstruction Angled Ceilings are not supported.
2. Installing the Fan NOTE: THIS FAN ONLY NEEDS ONE SET OF INPUT WIRES (black, white and ground wire). Both of the fan and lights will be controlled by the remote controller. The wall switch is not able to control the fixture full functionally. THIS FAN CAN ONLY BE CONNECTED ONTO ON/OFF SWITCH IF YOU HAVE ONE, NOT SUITABLE FOR DIMMAER SWITCH. Step 1. Install the Bracket Secure the mounting bracket to the ceiling outlet box with the screws and washers provided with your outlet box (Fig. 1). Fig. 1 Step 2.
Remote Control Instructions ① ⑬ ② ③ ④ ⑤ ⑥ 3 2 Stop 1 4 ⑭ 5 ⑮ 6 ⑦ ⑧ ⑨ K+ ⑯ K- ⑰ 2H ⑱ ON/OFF ⑩ ⑪ 1H ⑫ NOTE: Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (not included) ①: Turn off the light / fan ②: Turn on the wind guide wheel (not applicable for this fan). ③④⑥⑦⑭⑮: Turn on the fan / fan speed ⑤: Turn off the fan ⑧⑩: Adjust the brightness of the light ⑨: Turn on / off the light ⑪⑱: Timing the fan.
APP Control Instructions NOTE: Scan the QR code and install the APP in your phone, or search and install "FanLamp Pro" from Google Play, Apple App and other APP stores. Make sure your phone is connected to the internet and bluetooth enabled. Pair button. Click it within 5 seconds after the fan is powered on from wall switch. After the fan flashes or beeps, it has been successfully paired with the phone, it can be controlled through it. Slide to change the fan speed.
Trouble Shooting 1. Fan Does Not Work • Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch. • Check the remote control battery (not included in this package). • Check the circuit breaker to ensure the power is on. • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram. 2. Lights Do Not Light Up / Flicker / Noisy Operation • Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch.