The supplier does not accept any liability for damage to countertop, sink fixture, faucets or personal injury during installation. Warranty is unvalid if these installation instructions are not followed.
Installation Options: Noted: Kitchen sink side with “FRONT SIDE” label should be installed outward. There are different installation options depending on your cabinet design. Caution: All installation types need to allow room for faucet installation. Ensure adequate clearance behind the sink for any faucet and backsplash, as well as full range of motion for faucet spouts and handles. Typical undermount installation with 1/4” reveal is recommended.
1. Prepare the Sink Base Cabinet There are different installation options depending on your design. Farmhouse sinks require custom sink base cabinets with a front cutout to accommodate a 10” deep sink. Build a plywood platform on a support frame inside the sink base cabinet. Platform must support the weight of the sink and any attachments such as garbage disposals. When the sink is placed onto a platform, make sure the top of the sink is evenly flush against the bottom of the countertop.
