User Manual

GETTING STARTED WITH HDX
The Galaxy 32 Synergy Core features dual HDX primary ports which connect to the HDX
cards in your Pro Tools rig using DigiLink Mini cables (not included). This chapter explores
two scenarios of integrating the Galaxy 32 Synergy Core with an HDX setup.
Galaxy 32 Synergy Core as the Master HDX device
In this scenario, the Galaxy 32 Synergy Core is your sole HDX audio interface. The unit is
connected to an HDX card and is optionally connected to a computer over Thunderbolt™
for use with the Control Panel application. Once connected, do the following:
1. Open the Control Panel application and select 'HDX/INT' from the Clock Source drop-
down menu:
OR
On the device itself:
● Press and hold the left function key to enter Menu 1, shown on Display L.
● Turn the jog wheel to select the Sync Source entry.
● Press the jog wheel to confirm.
● Turn the jog wheel to select HDX / INT as the sync source.
● Press the jog wheel to confirm.
● Press the left function key again to exit the menu.
2. Open Pro Tools and enter the Hardware Setup window.
3. Click on the Clock Master drop-down menu. Make sure that device HD I/O #1 is set to
Internal.