User Manual

Zen Tour Synergy Core User Manual 37
Gain Knob
Click and drag the knob or double-click its text
label (inner center) to adjust input gain. The
available gain ranges are as follows:
● Mic: 0dB – 75dB
● Line: -6dB – 20dB
● Hi-Z: 0dB – 40dB
Input Signal Meter
Visualizes the input signal strength. Running into
the red ‘clips’ the input because of excess gain.
Reduce gain.
Note:
Some recordists enjoy the sound of
overdriven mic preamps and mixer inputs for vocal
and instrument recording. It’s safe to give it a try,
but don’t push too hard.
Mic Emulations
Click the mic symbol to open the ‘Mic Emulations’
window. It’s available on inputs 5 – 8 in ‘Mic’ mode.
48V button
Enable/disable 48V phantom power for condenser
microphones by pressing Ctrl + Left Click
Phase button
Flips signal polarity
Text Label
Below the gain knob. Click to change the channel
name.
Notes:
The 48v phantom power button is protected with a tooltip. Press Ctrl + Left Click to
enable phantom power on the selected mic preamp.