Instructions / Assembly

Pallisades™ Fountain AD97765
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures. Printed in China
Carefully unpack and arrange all
parts.
Pass the cord attached to the light through
the hole as shown above.
Position the light in place.
Locate the light cord and
securely attach it to the
transformer. Do not submerge
the transformer.
Align the cords with the groove and slide the
pump access door in to place.
Locate the tubing from inside
the fountain and attach it to
the pump. Place the pump
inside the fountain.
Note: LED light comes pre-installed.
Installation steps for reference only.

Summary of content (5 pages)