User's Manual

1 The functions, features and settings
of the ANGEL are controlled by a
3 directional navigation button
located on the rear of the grip frame.
2 The button can move up and down
to scroll through features and
settings indicated on the display
and can be pressed in to select
the highlighted function or setting
required.
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
·
Ensure a barrel blocking device is fitted
to the ANGEL.
·
Ensure the hopper is removed from
the ANGEL.
·
Ensure that there are no paintballs
in the ANGEL.
·
Paintball industry standard eye/face/ear
and head protection designed specifically
to stop paintballs and meeting ASTM
standard F1776 (USA) or CE standard
(Europe) must be worn by user and any
person within range.
·
SHOULD YOU BE UNSURE AT ANY STAGE
YOU MUST SEEK EXPERT ADVICE.
Navigation Button
The navigation button is located on the
rear of the grip frame and allows access
to the ANGEL internal menu option.
Push the button up or down and hold
for 2 seconds.
To navigate through the options simply
push the button up to scroll up and
push the button down to scroll down.
Press the button inwards to make
a selection.
1 2
3
5
4
3 Remove the right hand grip cheek
by removing the 3 screws using a
suitable 2mm Allen wrench.
4 Using a blunt pick or the 2mm Allen
wrench, carefully prise the battery
clear of its terminals.
5 Remove the battery.
Observe the battery polarity as marked
on the battery housing terminal and on
the battery.
Always use a good quality fresh battery.
Battery Replacement
4
READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL. SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.