Installation Instruction

7. Note: For a Class A digital device or peripheral:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

8. Note: This unit complies with European standard EN60950.

Equipment Symbols Used

Please observe the meanings of the following symbols used in our equipment and the compliance

warnings:

Symbol Compliance Meaning

--- FCC

WARNING: This is NOT a CONSUMER device.

It is designed for installation by FCC LICENSEES

and QUALIFIED INSTALLERS. You MUST

have an FCC LICENSE or express consent of an

FCC Licensee to operate this device. You MUST

CFR 90.219) online at www.fcc.gov/signal-

boosters/registration. Unauthorized use may result

in significant forfeiture penalties, including

penalties in excess of $100,000 for each

continuing violation.

Alert sign to R&TTE

To be sold exclusively to mobile operators or

authorized installers – no harmonized frequency

bands, operation requires license. Intended use:

EU and EFTA countries

Indicates conformity with the R&TTE directive

1999/5/EC certified by the notified body no. 0700.