User's Manual

User’s Manual for ION-B Systems
Page 36
Manual TFAH-
ES70_80_50.doc
8. Locate the output connector
for the power supply on the
left side of the supply.
9. Loosen the 2 Phillips head
screws and remove the output
connector.
Figure 2-29 RU power supply output cable
10. Remove the defective supply.
Figure 2-30 RU with power supply removed
11. Replace the defective power
supply with the new power
supply.
It is very important to confirm
that the replacement supply is
the same type as the original
supply. The AC, DC, and
Vdc/100 supplies are not
interchangeable.
12. Reconnect the input and
output connectors, and tighten
the associated terminal
screws.
Figure 2-31 RU with replacement power supply