User's Manual

4. Commissioning
MF0123A1F_FCC_uc Manual for PSR 700/800 MHz
Page 21
Notice: When positioning the PSR in the bracket, be careful not to damage the threads
of the bolts by pushing or pulling the unit too hard in the process.
When the PSR is correctly positioned, fasten the
unit again with the six M6 screws that you
unscrewed before (three at each side) using the
M6 Phillips (cross recess) screwdriver:
Finally, use a standard 10 mm wrench (or open-ended wrench) to fasten the bolts with
the M6 washers and nuts of the accessory kit: